Separate names with a comma.
There was a problem with the switches and actuator for the lock. They did a software update so it ignores the switches (I think). Part of the...
Just back. From a long weekend away, so apologies for delay in responding. Yes quite possibly the same thread, over on ducati.ms I think. Andy...
If you have to go trade in, and depending on miles, that is a sensible price. The standard suspension works great. If your only going from solo...
Yep, Andy is in the loop, and has access to my pics. I will take more when the bike goes back together to show the routing along the frame....
Here you go, one of each of the calipers, and the end that connects to the abs pump. One of the advantages of the loose ends is that you can...
Finally got arounf to digging out the receipt for the hoses for the monobloc upgrade. All parts are ordered from Venhill.co.uk Motorcycle Braided...
Ah doodle, I know what your talking about now. Thin box with red and black covers, that the leads from the gps plug into ? Its not a suppressor,...
The noise suppressor doesnt help with the radiated noise though, unfortunately. If you want to experiment try the unit connected direct to the...
great to hear Nelly, thanks for taking the time to comment :upyeah: Etherion, as far as I recall the flakey rockers on 748 / 996 was not oil...
I patched into the power feed for the aux socket. My experience is though that this supply is very noisy. I also get a lot of radiated...
Derek, thanks for expanding, I agree with what your saying, its the pins and bushes that wear. From experience though i have found the chain...
525 vs 530, your comparing 1/4" to 3/8", so its potentially only 60% of the roller width. The chain plates are the same strength so it doesn't...
One for me please Andy. At that price its a no brainer :upyeah: I will ask around my mates, see if they want any (they don't look on here - they...
Well its sort of right. Aluminium oxide is very tough, which is why its used for sand paper. That doesn't mean they design the bike to have alloy...
no mate, its the wrong diameter. Why not just use the side stand if thats all you want to do ? Thats what I did...
I disagree ST. DTC stops the wheel slipping under power, ABS stops the wheel locking under braking. I can lock my rear brake with standard pads...
MJW, Nice job ! I have been running Monoblocs on the front for a while now, with standard discs. That is superb too, so your Braketechs must be...
Frshage, are you sure the full termi system comes wih an ecu ? I thought they just reflashed the existing one now... I have the QD system and it...
Count, that sounds like the bike at P&H ? The graphics should come off with a bit of gentle heat. Try a place that does wrapping, they should be...
Why not just order another one ? No idea how much it is, but it can't be much (but then again...)
