Separate names with a comma.
Do not reuse the nuts as they are crimped and designed to be replaced each time they are removed. New ones look much better as well and are not...
Personal information and privacy are all part of "our" human rights. In another life I used to have the job of examining who could be put under...
37,000 Miles that's a lot considering he wants £4,000. Makes me wonder how much my 250LC is worth with only 13,000 from new.
Mathesis tester should tell you if there is any problem but unless you have one it will need to be done by a Ducati dealer.
It could be a sticking thermostat or a defective temperature gauge sender, the one that informs the ECU of the bikes temperature. I had a similar...
His resume' it would appear so I guess. Sledge was an inaugural Rhythm and Blues Foundation Pioneer Award honoree in 1989. In 1996, he was the...
Take the relay to an auto electrical stockist and they should be able to get you the correct one as they have a reference manual that they can use...
There's someone on this forum selling an 848 Ohlins damper for £190. The new Ohlins do fit 748 - 9*6's and from the photo it should fit your bike.
I don't see why not, the return is only there to relieve excess pressure when fuel is flowing through the circuit. I assume the fuel pump in the...
I follow what you mean now and I mistook your comment on the quick disconnect plug as being the electrical connection to the fuel pump. If I...
Just go for an alloy basket and use alloy plates, that will be cheaper than a slipper.
You will need spacers to raise the rear of the seat to get the correct fit. You will also need a mounting bracket\brace which can either be an...
As mentioned adjustability. The stock damper is quite stiff and I use an Ohlins damper on my 998 simply because I can wind it completely off and...
Check to see if you have a blocked breather either in the line from underneath the tank or the vent holes under the fuel cap. It sounds from your...
I have them on my 748SPS, easy enough to fit. They were all the "rage" about 5 years ago but not so much nowadays. Whilst I wouldn't bother to...
PM me and I should be able to do them for the cost of materials if they are repairable.
From my experience I would not attempt it, it will become more embrittled with age. I bought a red top fairing quite some years ago from someone...
I double skin mine where there is room, possibly the O\P can post up some photos and then get a consensus of opinion. There is also a mouldable...
How old is it? If it is an early model that uses red plastic as the panel moulding they are very hard to repair as they become brittle with age...
There is a tool available that will hold the pulley in place, check out eBay. It does take a bit of effort to undo from my experience but you do...
