Separate names with a comma.
Following pictures self explanatory , pump stripped , very clean inside. The aluminium casing was cleaned up with a 4" wire brush in a drill held...
After what we thought was spring it has turned cold again so no resin pouring for this week. I'm pottering about looking for jobs to move the bike...
I cut down some stainless bolts to get the ss studding and turned down 2 ss mounting nuts (from Screwfix), then drilled and tapped some 12mm...
This is not a complete disaster as the current position of the oil cooler, hung from the top of the front head, puts it in a place that is...
Whilst waiting for the P38 on the tank base to go off I thought I would tackle a job I have been putting off, namely the oil cooler mount to the...
With some warmer weather I was able to take the tank plug out of the garage and sand down the base. Sanding in the garage is a pain because the...
Further filling of the underside of the tank has also been done this week. This is going to take a long time because a) the convoluted shape means...
Armature was then tested for continuity and the commutator polished up with 800 grade wet and dry. Re-assembly is a definitely three handed job,...
Motor then stripped down. The circlip holding the pinion on has the smallest set of eyes I have ever seen. My circlip pliers would not fit and I...
The nut was dremelled off with only slight damage to one thread. The armature casing then cleaned up and rubbed down. [ATTACH]
Some progress this week. The starter motor cable was completely corroded on, the nut holding the cable was almost unrecognisable as a nut. I think...
I may be wrong but if a torque wrench is attached to your head bolt spanner will it provide the "right" torque setting at the head stud. When the...
Since I will be spraying resin I have gone for one with inclusive eye protection so more of a hood than a mask, when it eventually arrives I'll...
Pictures fairly self explanatory. I found some old convector heaters that were taken out of the house and stored in the top of the garage and...
This is great - here's my list - if I can remember them all Wipac power assisted bicycle bought for 10 shillings at age 13 Honda C50 ohv written...
Even modest inputs squats the rear and cause destabilising front end lift and constantly fights the limited traction that is available from such a...
Whatever Chaz does is good in my book. IMO, outstandingly the best rider in WSB last year, bad luck for him he had a lot less than the best bike...
Ronseal garage floor paint is an absolute and complete waste of money, mine lasted less than a year after I spent a weekend painting it, having...
I have not yet had the application pack returned by e mail , presumably they are on Christmas shut down, as soon as I do I will publish on here.
Ok I give in, 4 wheels good 3 wheels bad it seems.
