Separate names with a comma.
I had a snapped subframe on my 749s. I found a highly skilled welder to repair it. I think he inserted a small piece of material in the hollow...
As I have contractual obligations to make at least a guest appearance at Bury hill, will I be seeing any of you reprobates there tonight?
That's a proper motorcycle Mervyn. Drool.
Put a short length of timber though the wheel and revolve until it's firmly against the swing arm, then tighten.
Thanks Ian I don't get on well with the manual I have in digital format , takes me hours to find anything. Much prefer an oily dog eared paper...
Now found it's 45nm for the calipers The 230nm I mentioned is for the rear wheel retaining pack nut both sides ( 48 x 1.5mm) Can't find anything...
Watch out for salmonella from the hedgehog! Hedgehog hazard: Cute pets can carry dangerous form of salmonella | OregonLive.com
Been looking on my online manual for this figure , can't find any mention of it in the 'Torque settings' I have removed and refitted them before...
. I've done this horrendous job of re packing as I thought my silencer was too loud. Pulled out about a dustbin full of fibreglass wadding,...
Sort yer self out Fin FFS This isn't a rehearsal !
Thanks R I need to rtfm, been so focused on the rear end I haven't even looked at the sump! Re: mangling washers. I use a dab of grease to hold...
Ian Thanks for the advice, only thing I don't understand is you mention '2' new o rings for the filter. Is this the pre filter? I'm trying to get...
Sam1199 on here made a gauge for his Pani by sawing a small piece of 2"x1" timber about the size of a matchbox, and then cutting a ledge in one...
Thanks for your reply Andy. Opie oils has an ebay shop, and £3.74 is the price for 1. +£2.75p&p
What oil filter do you use for your 848 evo? I'm considering using a Mahle OC5, for 2 reasons 1.@ Mr R on here rates the Mahle filters, and he...
I going to Bury around 6pm- inshalla.
Fitted an Ohlins ttx but the spring was too stiff for my weight, so now have a softer spring and still fiddling trying to get it set up correctly-...
Hows the 749 going Phil? I miss that bike so much!
I bought the same one as Paul ( Bradders) mentioned. Chuffed to bits, works perfectly, very easy to use, and for a change very good instructions...
Looks like a Machine mart one, I was looking at them last week, not bad for the money. Clarke Premium Tool Chests - Machine Mart
