Separate names with a comma.
Interested to know what software you used, and did you use a 26mm ring spanner to hold the cam tensioning pulley nut, or did you improvise?
After a recent, mostly motorway, 200mile ride in just above freezing conditions on my newly acquired Triumph Sprint wearing a loaned Exo...
According to Holts, the product is water based, have you tried hot soapy water first?
Great music.
Another idea is to visit an electrical contractor/wholesalers. You might be able to buy a new terminal from them, and if you play your cards...
Can you not remove the cable and get another terminal fixed on? presuming of course that the problem is where the cable joins into the terminal!
Hopefully you have found the cause of the problem. Wether or not it has 'been like this constantly, or just when you went to remove it'- the cable...
That's a very loud clicking noise, or does it just sound very loud because you have positioned your microphone very close to the source of the...
It does appear that my 12,000 mile belts are just a little loose. I spent a while measuring them to ensure I was confident using the software. I...
Re: not going above 8k r.p.m This could be the symptom of a dirty fuel filter, when was the last time it was changed? A dirty/blocked fuel...
One possibility is with an electric welder. The theory is to try to strike an arc and get the electrode to stick on the broken bit which you can...
Rereading your post again. I would definitely remove the coil pack and the spark plug from the horizontal cylinder and inspect them for...
Tom First thing that I would find a probable cause of your trouble would be the soldered joint you mentioned. If you suspect it might be a 'dry...
Borgo I learn't from a learned member on the other site that copperslip should only be used where heat is an issue, as it can encourage or...
I don't think it's a good idea to attempt to start the bike with an Optimate connected. I don't have knowledge of the undoubtedly sophisticated...
Excellent antonye The first option you proposed was exactly what I want, didn't know they existed, so many thanks, much appreciated.
I'm interested in buying a long 4mm Allen key to undo the lower front Allen headed bolt that attaches the air tube to the airbox on a 749/999. My...
Welcome Tom Respect for getting in and removing the alarm, not the easiest job imo, well mine wasn't. I had my alarm on for 3 years, so much...
The blind watchmaker: Richard Dawkins- Darwinism
Peter The beauty of the programme I mentioned is that there is a clear vertical yellow line with the 'target frequency' in the middle of the...
