Separate names with a comma.
Hi Denzil, How are you getting on? Love to @Denzilina :) The Malibu we had handled nicely, rode nicely and I think had a 3 cylinder turbo engine...
We hired a Chevrolet Malibu for a 2 1/2 week, 2,500 mile road trip around California, Nevada, Arizona and Utah. It was great. It was comfy,...
As lives are at stake, I’m sure a way could be found to give a similar perk of equivalent value but in a slightly different form.
90 degrees is not absolutely optimal but is close enough with minimal offset. It’s not hard to get the optimal angle for any reasonable offset....
If it’s true that US citizens/personnel are driving left hand drive cars on the right of the road within their bases, then it’s hardly surprising...
Nice gauge... I too made my own but it was much cruder than that, still effective though :)
Of course extending the length of the lever by attaching the crows foot at 180 degrees is going to significantly alter the torque applied before...
Welcome. Whereabouts in the bayarea??
Yes and because of that, the longer the crowsfoot extension is, the bigger the discrepancy between the actual length of the torque wrench and the...
Just as well because no torque wrench is going to be 100% accurate throughout its range.
Simply measure from the end of the torque wrench to the centre of the bolt/stud/nut with and without the crowsfoot extension in place at 90...
Poke with zip tie??
Yes, Ive been known to do that
The clue is in the name. 1 foot pound is the torque applied by applying 1 pound of force to a lever 1 foot long, or more accurately, at a...
My guess is that it’s firing on one cylinder. Is it down on power generally? Could well be a plug.
Information direct from a distributor with no axe to grind is hardly hearsay.
IME, Derek is one of the most knowledgeable and helpful contributors on here. He is not given to “crabbing off” products. If he is issuing a...
The oil leak may be clutch fluid if you have a slave cylinder on the left as with bigger bikes. Jumping out of gear is usually a result of not...
For our boiler it was fan failure.
Having been inspired by a certain sprocket removal thread, I decided to have a proper go at changing the bulb in our Neff built under oven. To do...
