Separate names with a comma.
Pager 98 of the owners manual Refitting the seats and configurations Refitting the rider seat The rider seat (8) is adjustable in height. Insert...
Assuming someone is walking around with the right allen key :) then the Roadlok will still be engaged and act as a normal disc lock and it will be...
I installed a Roadlok XRA307 onto my V4S today and the following maybe of interest. The OE calliper bolts are 70mm M10 and use 16mm of the 23mm...
Not had that problem but it took a few weeks on the V4S for my thumb to automatically get the right switch first time.
Definitely the ACC applies the brakes when just engine braking is not enough to maintain the gap and when it does apply the brakes then the Brake...
I have been riding recently with the heated grips and a W&S jacket on but not the heated seat as I find I don't need it with the heated jacket and...
New issue with Ducati Connect and Android 13 phones. Having not ridden for a couple of months during which time my phone had an update to Android...
I'm a 50/50 user of the kill switch - however the Kill Switch should kill all the electrics on the bike as that is what you would look for and use...
Try Bennetts insurance, they were the best by far for my V4S.
The wire piece is from the lower part of the engine at the front and above the sump guard, fits on a bolt down there and is a holder / guide for...
I had a 2015 DVT for 3 years and did 29,000 miles on it before going to a 1260. It did have a couple of fuel senders and chain and sprockets...
My CNC 36/30mm Socket arrived today - Thanks to @steveb123 - looks good and is a good fit on the wheel nuts. Just to note the socket is quite deep...
The horn is in the beak and just the lower panel needs to come off (IIRC 2 screws). I fitted the Mini Denali on mine, and it was a straight swap...
There was more than enough water about today to wash any salt off the bike :) Impressed with the weather protection on the V4 kept me pretty dry,...
Normally heat expands metals - maybe the swing arm gets hot (it is right by the cat) and expands a fraction? But I would have thought that the...
No Idea how they got any extra grease into the bearing, all they said was they used a high-pressure grease tool to squeeze more grease in and then...
Update – The bike (V4S currently at 11K+ miles) has been to the dealers and the rear wheel bearings are all good. The three bearings in the rear...
An Optimate 4 would be cheaper than the Ducati option and hard wire a short lead / outlet direct to the battery.
This is the heating element from the rider seat. https://photos.app.goo.gl/jShYqrKXrkAz52pS6 The power connector is at the back of the rider seat...
Tha standard seat is not very comfortable, you are pushed forward into the tank. I then got the Ducati heated "comfort" seat, better but after a...
