Separate names with a comma.
I've crashed in the astars tech air. Was very good. The budget missile suit that it was under was not so great and was totalled (80mph lowside,...
What are you fitting next?
Bummer. Its only 35 mins down the road from me.
Are they allowing spectators?
If its the same as the warranty I had on my 1090 adv R a couple of years back, it is basically open ended as long as you use franchised dealers to...
I have had several sets of Dainese 4 stroke gloves. They last well and offer the same sort of hand/knuckle protection as the full metal gloves...
Translogic QS. Dump the oem unit as they are sub par with the rest of the bike. Also found the RCS 17 master cyl to be a worthwhile improvement...
I found it really useful and predictable on the '16 R. My local track in Sweden had a "mini cadwell mountain" followed closely by a 180 deg...
I'm pretty sure its legal these days as KTM have it in their upgrade package for the new 1290 SDR. As to whether modulated brake lights are a good...
Nice mate. Glad you are still happy with the purchase :upyeah:
Once you dump the sketchy oem quickshifter for something more reliable, then you can fit a normally adjustable shift rod section.
You could try one of those abrasive wires used for cutting pipes with restricted access. Look like a cheese wire but impregnated with diamond etc....
By the looks of the thickness of the cut, you are using one of grinding disc proportions, not a cutting disc of around 1.6mm Also, aluminium does...
For those still struggling with visualising sag, this may help.[ATTACH]
3.1 front so 25%
Yeah, the S/Rs will move a little cheaper. I've sold both in the last 6m and asked the same price for a tidy pair plus extra rear with several...
pass. Possibly spark colours when grinding etc. Not really sure.
Bolt length is pretty irrelevant. Its how much of the threads go into the hole when assembled. If its a 10mm dia bolt, then 20mm of thread into...
The weakest link in this scenario, as long as the titanium type is of sufficient failure capacity for the job, is the aluminium. The guideline...
No, the depth of hole is relative to the number of threads required for material stability. The diameter will have more to do with the tensile and...
