Separate names with a comma.
Good. You haven't actually said though if you have disconnected each plug in turn to make sure it's not firing on only one cylinder. Imho, it's...
Yes, the exhaust outlets don't fill the apertures in the termi carbon shroud.
Sounds a lot like firing on only one cylinder. Have you tried removing a plug lead from each cylinder in turn to see what difference it makes? Did...
Is it firing on both cylinders??
Have you tried it since? Sometimes you can find that something works with a new sensor but it was the connector not making proper contact due to...
Ouch!!
It did fire up beautifully but when I decided to top it up before taking it for a spin, the motor died as I pulled up to the pumps. Luckily, it...
What I was wondering is the difference between weighing on a level surface and weighing with the bike level. I would expect lifting one end onto a...
Interesting about weighing either end and then adding the two together. Can't help wondering if it would make it more accurate or what difference...
Does it have ht leads or stick coils? Front stick coils on these bikes are very vulnerable to the elements and often give trouble
You are supposed to disconnect and reconnect the terminals in the correct order. Disconnect negative first, reconnect positive first.
Do they move reasonably freely? Not sure of the official test but I freed mine until I could move them freely enough between thumb and forefinger...
Motul 7100 fully synth for road use. Motul 300v fully synth racing oil for track However, as it’s a great oil and I can use my Halfords card to...
Are you sure you haven’t got seized bobbins?
@Derek was able to pont me to one for my 999...
Of Corse
Taking the shim (if you have one) out from under the cps will reduce the air gap and is very simple to do. The shim is held in place by the bolt...
In what way - what’s the difference??
I wouldn’t know...
