Separate names with a comma.
Did you run the engine to get the oil hot and thin before draining?
The point is that, due to their location, they are prone to failure and difficult to get at. Therefore it's a good idea to replace with new and...
A chain is only as strong as it's weakest link, so you need a really good battery to match your super-duper new high capacity/low resistance...
Sending an empty envelope is pretty underhand... I tend to use pp because it is so very convenient. Buying by credit card gives better protection...
If the pushrod is spinning, producing friction at the slave cylinder and there is water contamination in the fluid, could it be that the water in...
How do you know there is no power to the switch? If there is none, I think I might try tracing it back until I find some, thus narrowing the...
Without looking it up, I don’t know but I can tell you that when I got my 999, the front brake didn’t operate the brake light. @Derek told me to...
Fuse?? My experience of an SS was that the fuse could be intact but still not work due to light corrosion between fuse and fuseholder. Wiggling...
Allegedly, the windiest place in the UK... I'm an ex windsurfer too, still have my custom 260 sinker but sail a Hurricane catamaran these days - a...
Impressive
Oh dear, can’t spell plain - American influence ??
Look at the receipt
For the SS at least, the air filter could be substituted with one for a Porsche 924. Fitted perfectly
Fuel filters: BMW K100RS part number: 13 32 1 461 265 (8mm) or 16142325859, Purolator F20011, AC GF61, Fram G2, Motorcraft FG-2, Wix 33032,...
If it's the teabag type, I've an idea you can use a much cheaper but identical one supplied for another vehicle, maybe a car. Maybe someone else...
"On the tank leakage point, I couldn't seem to replace the lower cap with the o-ring in the groove - seemed impossibly tight but cant remember if...
If you mean what battery to replace it with, I would be inclined to go with the one specced for the 998, which is smaller, so won't fit snugly in...
No suggestion that the oem items are not viton, merely that using any old o-ring is not advisable. The op complained that the o-ring in place...
Iirc, according to @Derek, tank o-rings always need to be replaced with new viton ones as they will have swollen (presumably from contact with...
Personally, I would junk that enormous wet battery and replace it with a smaller but punchier Yuasa AGM maintenance free one that you can get for...
