Separate names with a comma.
Yes, without the microphone you can get a bit of a sore thumb from all the plucking... ;)
Outboard motors tend to have breathers on the tank that you can open and close. Classic scenario is for hapless owner to start motor, go buzzing...
A kinked breather hose will cause fuel starvation due to a vacuum forming in the tank but the vacuum would normally take a little while to form,...
If it will tick over but won't take any throttle, then blocked main jet/s would fit.
A really good paint will seal the surface and prevent corrosion but poor paint will trap moisture and promote corrosion. Allegedly, OEM paint is...
Agree on getting it polished and then giving it a regular once over to keep it that way. Autosol will work but I recommend you try Autoglym...
Why DOT3?
Dot Cotton?
Or your eggs...
Copy cat
Just like the Pazzo copies I have
I have some Chinese copies of Pazzo levers, which are are actually really well made and look a thousand times more right on the bike than the...
Happy Birthday Hexy
Take a look at Ducatisuite. I found this to be an invaluable resource when I had a 750ss and it should be even better for you as it's actually...
Exactly that - stories...
So a 5 or 10 ml syringe will fill the system up to the point where you can top up the reservoir. Ah, I see why you need the second syringe now....
How big is big?? Surely you only need to attach the syringe to the slave bleed nipple once, either way? When sucking the old fluid from the...
Sounds good. Could you not do this with one syringe by sucking the old fluid from the reservoir first, clean out the syringe with some fresh...
Only if it starts slipping, otherwise don’t worry about it.
Indeed. The steels all engage on the hub and the frictions all engage on the basket, so steels don’t rotate relative to each other, only relative...
