Separate names with a comma.
Good news you’re on the mend DB ❤️
The slave cylinder is part of the mechanism to lift the pressure plate and free the clutch. It can often be associated with clutch drag, due to...
Good news :) What coolantso you intend to use? Distilled water is a more efficient coolant than the conventional 50/50 mix of water and ethylene...
That’s what they all think...
In theory, 5/40 should be the same thickness when hot as 15/40 but thinner when cold. As most wear is reputed to take place at start up, due to...
It's not simple though, even if you follow that rule, there has to be a limit on how far away traffic needs to be before you don't need to give...
I’ve an idea the wording is to give way to traffic already on the roundabout. If so, that’s not quite as simple as giving way to your right.
Don’t bother putting it back in. As I said, aim for a lower rather than higher stack height. Doubled plates run together and don’t move relative...
And how are you getting on ?
Morning Sweetie ❤️ xXx
The solstice varies? Thought it was the 21st every year... :/
Take a doubled up steel out. If you’re not a huge fan of the dry clutch rattle, you can always do the quiet clutch mod and start with a friction...
I’ll bet your new plates are binding in the basket slots. Cure is to use old plates in the top quarter or so of the pack. When they’ve been in a...
Just stick a big Phillips screwdriver through the redundant hole through the engine and lean the handle on something solid like an axle stand or...
Btw, if you lean the bike well over to the right, you don’t need to drop the oil:)
xXDBXx
No copper shielding on my bike and it was fine
Yes the soldering is outside the casing but if they are from Exige rather than Electrex, maybe they come full length with plugs? It’s a while ago...
@chrisw ??
When I got my SS, I was warned by a local expert that alternator nuts come loose, so listen for rattles/knocks. Sure enough, it happened and I...
