Separate names with a comma.
The part number is 93783.1524. It has been used on all Ducatis since the Pantah and is still used on current Ducatis. It is an ordinary lip seal...
It's always the way I've fitted them, the arrow indicating the direction of rotation.
Understandable really. Oil pressure lights have always been red and the symbol does have an oil can symbol. I see though that there is an oil...
An indication of the times ; the first sections cover the cruise control and Infotainment and the controls aren't mentioned until page 127!
1st service is required at 1000 km which is 620 miles. I'd say the light refers to the oil service now being due.
That is the correct way to do it on later engines which have releasable cam pulley screws. Loosening the screws allows the belts to be tensioned...
It is the vertical inlet that wants to move because the valve is fully open. If you are lucky, on some engines the rocker will sit on the cusp of...
He would appreciate that.
Chris, my son is currently converting an ST4s into a Paul Smart Replica (ish). The ECU is one on which you previously disabled the immobiliser...
No. The idea is to position the piston at TDC at the top of the compression stroke so that both valves a fully closed and there is no load on the...
That looks good. Interesting cam lock tools you have. Where did you get them?
Line up the dot on the bottom pulley with the line on the engine cover and everything will be in the correct position. Then lock the cams and mark...
It should be and the vertical cylinder will be halfway down the inlet stroke with the valve fully open.
Yes, but make sure that every thing is in the correct position. The dot on the bottom pulley should line up with the line on the engine casing....
That's correct. The ST3 has a wet clutch.
Yes, the older be versions were definitely a plunger. There were 2 wire and single wire variations
Maybe the sensor is a proximity switch?
But he says there is no shim
Does the switch plunger get pushed in or down it need to be fully out to make contact? If it needs to be fully out then maybe it needs a shim and...
The switch provides an earth connection to the ECU when the bike is in neutral (or perhaps it's the other way round with the ECU to earth except...
