Separate names with a comma.
If you are thinking about using a fork oil different too the manufacturers recommendation be careful. I had issues with the forks on my Scrambler...
Does this help? The matching loom colours are shown in your diagram. [ATTACH]
The rev counter not registering is usually the first sign of a faulty voltage regulator. When the voltage drops below some figure the rev counter...
Yes it will Paul. The immobiliser is in the dash but the ECU can be reflashed to delete the immobiliser function.
The tacho on the ST3 is built into the LCD dash housing but it's an analogue display with probably much the same innards.
They are correct in that it's not the pick up, which is in fact the crank sensor, used by the ECU to time the spark and injection, etc. The tacho...
As Hejira858 says, it's a rivet. Drill the head off it and use a punch to knock the remainder through to the inside then pull the bar end out. If...
I fitted on to a 1098 Bayliss 3 or 4 years ago and it is still there with no problems. It was definitely better built than the original and the...
It shouldn't be a fail if the forks aren't leaking, unless it is so bad that the tester considers them to be "seriously weakened".
When I had the MTS1200 it too had problems with the paint flaking off the radiator ends and subsequent corrosion. I cleaned them back to bare...
I had a 900SL for servicing and spotted that the aftermarket unsheated brake lines had nearly worn through the RH fork slider but there was no...
Technically you won't even need to take the heads off but it will need ALL the shims checked and adjusted so it might be better with them off.
I don't know anything thing about race cams but the motor definitely won't have to come out to fit them.
Ducabike. I have them on my Supersport 939
Thanks for sharing that info Chris. I hope I never need to use it :)
Pretty low, probably around 10 - 20 mph
The only time I left the key in the seat lock on the MTS the dash warned me after a few hundred yards. Fortunately the key was still there.
Be aware that a rebuilt engine will normally need the oil pump primed before initial start up. a couple of years ago I drained the oil from my...
Here are pictures of the pick up wires to the igntion units taken when I had a 900SS 15 years ago. Horizontal [ATTACH] Vertical [ATTACH] Hope...
Try asking nicely ;)
