Separate names with a comma.
Silicone stands up to a remarkable amount of heat. When my son was a lot younger he bought a VFR400 Honda that had seen better days. Several of...
P2227 is a generic error code for barometric pressure sensor, possibly indicating a faulty MAP sensor. There are two, one for each cylinder.
I presume that it's the complete assembly that needed, the flange with the pump, filter, regulator and other bits. I couldn't find price for a new...
Pretty normal with that sprocket retainer. Check that it hasn't worn. Best to replace the retainer with every sprocket change.
I don't know if this has been mentioned before but if the pick up wires are reversed you will get very similar symptoms. Some replacement pick ups...
Check for continuity of the white wire between the LH switch (pin G) and the headlight connector. If that is ok check continuity between the...
The desulphate cycle puts high voltage pulses through the battery. If the lithium battery wasn't knackered before it definitely will be now.
I suspect that it contains a driver for the LEDs so not just resistors. Two other possibles; this from the US -...
If this is the part you are after they seem to be available - but hellish expensive....
It looks like it may be some sort of driver for the LEDs, not just a resistor. It should possible to get the LEDs to light with a suitable...
I just use a dab of tippex to highlight the marks when assembling.
So it's not just a simple case of substituting LEDs for bulbs.
Generally indicator bulbs are 21W but on many bikes they are only 10W. From Ohms law R = V x V / W Subsituting values; To replace a 21W bulb R...
Full marks for persistence I would just have made my own using the existing wires and connectors.
I had the same issue with mine. It did melt the numberplate though until I fitted a sheet of aluminium behind it.
No problem. I use an old netbook with Windows 7.
From the JPdiag forum : [ATTACH]
I downloaded it last week, V 2.0.1.5. It covers Scramblers and Monsters with the M3C ECU with 696, 800 or 1100 engines as well as the Supersport...
The latest version of Melcodiag works for the 1200 Monster, the Supersport 939/950 and Scramblers with the Siemens ECU and a few other of the more...
Sorry, I sold these ages ago.
