Separate names with a comma.
Yes. The ST3s and ST4s use the same alloy swinging arm. it should also fit the ST2 and ST4 which have a steel swinging arm.
The dealer can't turn off the light before it comes up. So if it wasn't on at the time of service the couldn't tun it off.
The solenoid connector also houses 30A fuse that covers the electrics for the whole bike. If that blows nothing works.
Is the M796 Ride By Wire? If so the spacers will do the trick. Being a cheapskate I used heat shrink. If it isn't a RBW bike then it's just a case...
Well done. I used a reciprocating saw but I think the Multitool would be better.
When I had a Multi I had this problem too. I felt that rotating the bars back a little would help but to get them where I liked them meant they...
The DCPR8E has a smaller ⅝" hex, the DPR8EA-9 has a different 'special design' tip, whatever that means, with the gap preset to 0.9mm. The bigger...
Additionally to what @Chris says: Try leaving the plug in place and check to see if there is a spark with a spare plug. With the plug in place the...
Is the ignition self generating or does it depend on the battery? If it needs the battery then possibly the starter is pulling the volts down.
Monster is the same fitting, standard tooth number is different
Has the rear suspension ride height been cranked up, pushing the swinging arm down (relative to the bike) so that the lower front edge is nearer...
Black Box System. It can cause many issues but I don't think the pump not priming is one of them, and it usually throws up CANbus errors.
If the pump itself tests out ok there are only 4 other factors that will prevent it priming. The relay, the side stand switch, the ECU itself and...
Yes, I fitted one to my 1200MTS. I don't know about the 1260 though. I fitted the one that had been on the 1200 and previously an ST4s to my...
22 years ago I realised that my hearing wasn't as good as it used to be. It was getting hard to hear what my mates were saying in the noise of the...
I think the Engine set to HIGH is the normal value.
See my reply in the technical section.
I've heard of these Q/S problems too. I had a look my own bike to check how to turn the Q/S off. From the menu it wasn't obvious. I had too read...
It's different. The spherical joint on the 1260's quickshift link is adjustable, albeit only in ½ turns. 1200: [ATTACH] 1260:[ATTACH]
Wisbech, if I remember. Is that in Norfolk? My English geography isn't that great, I've hardly ever been there :grinning: Mick Walker also wrote...
