Separate names with a comma.
A blocked breather would cause fuel starvation but I would expect that to recover after a while.
Could be you've sharpened the edges, so they're actually catching more. Spreading from the tabs being hammered doesn't matter, in fact it's...
Good point :)
Make sure the stack height isn't too high. You can get away with a low stack height much better than a high one. There needs to be a few mm at...
Also, make sure you have a couple of mm of play in your clutch lever but no more than that. If you haven't disturbed the clutch fluid and the...
The order probably won't affect drag much. New plates in old baskets often cause drag with unworn, sharp tabs catching in notchy slots. Watch...
Clutch drag. What have you done to the clutch, if anything?
If you like climbing with a mate, does that make you a social climber?
Of course, you could also buy oem Suzuki GS450 plates...
Yuasa AGM unless you're brave enough to go for Lithium...
They're actually pattern Suzuki plates but they're well made and cheap. They're for a GS450 iirc but I got mine from @Nelson on here. Steve @Mr.R...
Absolutely. I have swapped my 999 in-screen parking light for a bright white led one and use it as a bright daytime running light. I also have...
I used to use something very similar on a boxer
Have you checked out what the workshop manual has to say about carb tuning.? It's for the Mikunis of course but makes interesting reading. I...
Anybody remember Professor Stanley Unwin?
Wow, sounds like a great base for a project
Pro blem is that the worse the wear gets, the harder the tangs hit the basket, so the notches get worse and worse at an accelerating rate....
I never did get the Mikunis on my SS perfect. I never did manage to stop them hanging onto revs, as you describe either, although I did get them...
St Stuarts only friend, of course :)
The stack height can be quite a lot lower than recommended ime without problems. However, it mustn't be higher or there is a danger of the top...
