Separate names with a comma.
I don't think that's the part no. Harry. That is the EU emissions compliance homologation number. The part number should be on the back.
FYI. The part no on that silencer says it's from a 2002 on ST4s: "574.1.057.1B Silenziatore Sx. L.H. silencer" So definitely has a cat, as...
I just recieved a link to update the table. I hope I did it right :worried:
The cats came with the ST4s in 2002.
A few years ago I had an ST4s and repacked the Termis with Accoustafil. It was very easy but it does expand with heat to fill the cavity so...
I did a valve service on an ST2 last week and now have an 8mm shim at 7.05 available, but can't add it to the database myself.
When the dot on the lower pulley aligns with the line on the RH engine cover the horizontal cylinder is at TDC at the beginning of the firing...
I have 2 pairs of Voyager GTX. The first pair are about 18 years old now. I sent them back for refurbishing that were about 9 years old then a...
I'm not sure what you mean by "line up all three marks". To set the timing: Rotate the engine to the timing position. ie TDC on the horizontal...
motorcycle-exhausts.co.uk are the UK Termi dealer.
It is genuine. It is to verify that you are still an active DOC member.
Wouldn't be hard to do. The USB supply has spade connectors so you could easily change the positive terminal to permanent battery volts. I don't...
Ducati don't sell them as separate parts. Usually they are screwed and loctited in.
m not familiar with these particular forks but the bottoms must be separable somehow. Perhaps you could contact the suppliers of the fork tubes...
The front sprocket always wears out quicker - it's going round about twice as fast as the rear. On most of my bikes I find myself changing the...
Yes, they all have it. Item 1.[ATTACH]
There is an access plug at the front of the crankcase. Item 29. Clearance is 0.7mm with the engine at the timing position. (TDC on horiz cylinder,...
Good to see you are making progress. You can set the TPS with a meter, no need for Mathesis. It is fiddly but not difficult. The bike would...
Well that didn't help any. Mine says "10.989" just about under the nut retaining the pivot and "1" next to the banjo outlet. I'm pretty sure it is...
Ah! but it's not a gold master, it's the black coffin type. Most probably the same as my 907ie. I'll check.
