Separate names with a comma.
I did drop the bike at slow speed many many moons ago on a diesel slicked island that popped a hole in the generator cover. It was this that...
So a bit of chassis measuring today. I installed the swingarm eccentrics & pivot shaft to allow me to measure it's position relative to the top...
G.I.
That bolt hole, just below the gear selector shaft, looks like it's got some sort of packing in it... and strangely enough on mine that very same...
Yeah... for the sake of a few pounds I replaced those springs when I refurbed my Darmah and as the thread alluded to you just need to be careful...
I've had the bike 40 years and before it was being laid up for about 25 of them (ho hum : unamused:) the bike had a complete chassis/engine refurb...
Thanks for the advice & tips guys but first an answer to Paddy's question: The answer is no... I have two shock absorbers of the same length. If...
Oh arse... so I then looked at the swingarm to see if that was out. And sure enough it isn't sitting exactly horizontal - especially around the...
Update for this in a new thread, see https://www.ducatiforum.co.uk/threads/swingarm-rear-wheel-not-true.103627/
This is a follow up to the Twin Shock Rotation/movement Around Mounting Bolts where the plot has thickened somewhat. I did some more digging as...
On the Darmah both ends of the shock are bolted to the outside of the frame/swingarm mounting lugs rather than been 'pinched' in the middle of...
Derby
When the rear wheel hits a bump it's movement will not be exactly up/down but will describe a slight arc because it is rotating about the swingarm...
Servant
"The pendulum of history always overcorrects" Henry Kissinger
Middle
[MEDIA]
Lurcher
Cheers boys... :upyeah:so when I next need to take the covers off it's deffo gonna go back together with RTV silicone. I do like the ones that...
Hannibal
