Separate names with a comma.
I did an S4 a couple of years ago and used the flywheel tool for tightening the drive side nut. I can't see a problem, you just mount the flywheel...
Thanks for that info Geoff. Worth considering.
I agree Geoff, but for cosmetic stuff can you get stainless torx?
Your avatar implies that you are in the UK but from your reference to 14 gauge wire I wonder if you are in the US? The guy is correct that you...
You should be able to remove the terminal from the connector block. They have a tang on one side that locks them in. You should be able to flatten...
And here is a wiring diagram. [ATTACH]
That looks like a red/yellow wire to me and it's the input to the ignition switch from the battery via the 30A fuse in the fuse box. Check the 30A...
Sounds like the return spring is on the way out. Try lifting the pedal lightly with your foot before each downshift. If it shifts down ok then the...
The bike in Aberdeen was an 1100 Hyper so different wiring loom. If there is no total mileage it would seem that the memory has been corrupted so...
[IMG] [IMG]
Good idea. I've always used bits of folded cardboard.
I hope Nelly has some Mike. The only ones I've seen are these - pretty expensive!
If you mean 2 or 3 inches in a tube attached to the bleed nipple then that's not enough to have purged the complete system. I had a similar issue...
I suppose 10 litre is pretty massive right enough.
You don't need a huge pot for extract brewing as you are boiling the extract with some water and hops then diluting to the gravity you want before...
My brew length is usually 5 gallons or 23 litres and I end up with about 22L in the conditioning vessel. The cornies are nominally 5 US gallons...
I started botting but quickly got pissed of cleaning and sterilising 40 odd bottles for every brew. I switched to Cornelius kegs about 20 years...
There may be some variations Paul. I had a 1200 Multi with the full Termi system and upmap. The dash said "Race" at switch on but the servo did...
Off the top of my head I don't think the height is standard but has 2 or maybe 3 sizes depending on the thickness of the shim. Apart from that, if...
Yes, it sounds like the switch wiring is worth investigating. Let us know if you find anything.
