Separate names with a comma.
Great idea. This is the sort of thing I was thinking about when I said we need a database but I never thought about using Google.
I think that might not be as easy as you think, I'll and try and draw a sketch to show why, but as long as you have a known sized shim as a start...
It defaults to open. If it is not actuated by the ECU it will remain open.
Not sure what you mean either! The switch has 2 positions. Down with a circular arrow symbol, this is Run, and up with the same symbol crossed...
It will turn over with the kill switch on but not with it off.
I was going to say that but couldn't remember what 9/16 is in metric. I think it's pretty near 14.5mm
Yes, often they are rotten with verdigris. Water runs down the subloom and collects inside the rubber boot at the bottom. Check also the two...
14mm but it tends to be a sloppy fit. 1/2mm bigger would be better.
Make sure you also check the grounds. I was dealing with a guy in Aberdeen last week whose dash seemed to have packed up. It turned out to be a...
If it says "Racing" it's the official upmap for the exhaust. The dealer may or may not have removed the servo, with the upmap it is redundant.
If you have a Termi upmap the exhaust valve requirement is removed. So you won't need a servo eliminator and there won't be CEL errors on the...
Sounds like a temporary interruption to the supply to the clocks. Maybe a loose connector or a poor earth somewhere.
Like these :p [ATTACH] [ATTACH]
It at the front of the parts list: "Rosso Anniversary DUCATI" 473.101
It's very obviously wrong, the drain plug only has a 5mm hex which will round out very easily. The first time I did my own oil change I thought it...
No, but it won't matter. Just make sure none of them are kinked.
One tube is the tank breather so it's important that it's not kinked or squashed. The other is the drain hose from the filler area. If it's...
I did a stock take yesterday: [ATTACH]
Very nice but... are these paints petrol resistant?
Thanks for the feedback
