Separate names with a comma.
I can't really imagine the factory thinking about someone using croc clips to charge the battery. As far as Ducati would be concerned there is a...
Good you've got the wiring diagram. I see that it is indeed very similar to the Pantah.
Agreed, a huge improvement. The Indiana's were seriously ugly. I would think that the wiring would be very similar to the Pantahs. I have a 500SL...
Tracking across solenoid contacts isn't unheard of. It's not caused by corrosion but copper deposits that have been left as a result of arcing at...
I fitted a Chinese replacement radiator to a 1098R a year or two ago and the fans were handed right and left. The replacement radiator were both...
Try disconnecting the starter solenoid cable from the battery, or the cable from the starter if that's easier. If the current stops then there...
Yes, and pay attention to what Denzil is telling you.
The rear wheel nut on your 1200 should be torqued to 230 Nm which is 170 lb ft, well within the range of a 250 lb ft wrench.
I see that your loom seems to lie differently from mine. Probably they vary slightly depending on who puts them together.
Too technical for me. ;)
Something I've contemplated for years Finm. :p Amazingly you can buy home distilling stuff but you need a license from HMRC to use it legally and...
I've been brewing for about 35 years now, IPAs, stouts, porters, brown ales, wit biers, Belgian style ales, etc. This is my brewing set up - [IMG]
I've always wondered what that metal strip is for, I can't think of any sensible reason. Mine has plastic sleeve on the part alongside the battery...
The only sensor I can think of that could affect the stepper motor is the crank sensor although I've never heard of that happening. Usually they...
It depends on the bike. Ducatis up to about 2010 or so we're 12,000 miles or 2 years. Later bikes 15,000 miles or 3 years, then 15,000 miles or 5...
Not quite. The 900ss pressure regulator is mounted on the throttle bodies, the 1098 regulator is in the tank. You will need to use fuel lines that...
The legislation requires that speedometers must be accurate within 10% but never read slow so most manufacturers aim for the middle of 5% to allow...
Good news, so the coils were no good presumably with the wrong resistance. Had you swapped the pickup wires back?
Yes, that's the ones.
I have heard of two instances in the last couple of years where pickups from Electrex have been wired the wrong way round. This inverts the phase...
