Separate names with a comma.
The clutch switch won't stop the bike running but it will allow the starter to operate if the bike is in gear and the lever is held in. If it...
1st Ducati, an 860GTS that I bought brand new in Dec 1976 [IMG] Followed by the 1st 1978 black & gold 900SS bought as an ex-demonstrator from...
If it's any help, the 2005 ST4s used the 59AM ECU with canbus between the ECU and the dash It didn't make any more power. In 2005 Ducati changed...
Belts on the Scrambler are 15,000 miles or 5 years so they wouldn't be due.
The Threebond was probably the most expensive bit, the clutch control pin is only £16 odd.
Do you think it needed the new bearing or was that just as a precaution?
What the manual says. As soon as you start the engine oil will be pumped around and the level at the sight glass will drop. It will take a few...
Good to hear you got it fixed. Last year I had to replace the front master cylinder on a Scrambler (not mine). I realised that bleeding it...
No worries
I'm well aware of that. Didn't you notice the quotes around 'supposed'. I was being sarcastic. Ducati expect you to take the bike to a dealer to...
The Owner's manual won't tell. You're 'supposed' to take it to a dealer for that sort of work.
Yes, it's a right hand thread. I had the same problem, as others have had, with the lower rear shock on the 1200 Multi I had and ended up having...
I knew I had the information somewhere. To set the timing on the 860 engine with Ducati CDI electronic ignition: Fit a degree disc to the crank...
I doubt it. I'd think it would enough speed for the pickup to generate a pulse that would trigger the CDI.
This a 1977 bike which I'm pretty sure had the Ducati CDI electronic ignition as fitted to the GTS. The Bosch ignition was first on the Darmah...
It has 2 independent ignition systems, one for the horizontal cylinder and one for the vertical. It won't run if they are the wrong way round. You...
880Ω is in the right ball park for resistance. It's an inductive pickup so should put out a series of voltage pulses which would certainly confuse...
Yes, but in aluminium which I wouldn't use myself. https://www.speedyfasteners.com/Black_Anodised_Motorcycle_Fairing_Bolts_m6_x_20mm_p/sf974.htm
Download it for free from here : https://www.pdfmotomanual.com/manuales/ducati/eng
This is from Ian Falloon's 'Ducati Desmoquattro Performance Handbook'. Any help? It seems to confirm that the 39mm valves are from a 996RS...
