Separate names with a comma.
Ah well, getting the wires right helps ;) Idle speed should be about 1200 rpm + or - 500rpm
Yes, I used to have a VDO tacho like that. One wire to ign +ve, one wire to ground and the other took a feed from the switched side of the coil;...
Hi Jens, I presume the Monster is from an injected bike and you using the 750SS wiring and ignition. It is possible to have the horizontal head...
I'd have thought that Tony Brancato would have retired long since. The few times I managed to get him on the phone he seemed to want to chat for...
This is the Brancato one that I've been using for the last 15 years or so. (sorry the image isn't quite sharp) [ATTACH] I've had no problem with it.
If the 0.2 error is consistent at least you can still use the tool taking that into account. But why couldn't they just have taken the care to...
Just to clarify what you should be measuring. This diagram that I drew a few years ago is of a 2V closer but the principal is exactly the same....
This is what happened when I installed the Termi upmap on my Supersport. You get a dongle and a cable to attach it to the diagnostic port and...
I think you are visualising this wrong. I haven't got time now but will get back to you in the morning. Although someone else will probably chime in.
I haven"t got a Lazer tool I have another make,but I know how to measure shims. You should be measuring the overall height of the tool, not to...
On the DS and later 2V engines(and presumably the 695) you are supposed to lock the camshaft with a special tool inserted into the camshaft...
In his defence, I've bought stuff from supermarkets where the checkout has forgotten to remove the tag. It must have set alarm off on the way but...
Gearing Commander to the rescue again. :) [ATTACH] You can see that the sprocket centre distance only reduces by 3.66mm going from the current...
Can't say I'm enamoured of the colour or the squarish holes Mark but with a 1 tooth change at the gearbox sprocket the chain should be ok. With...
My son's Strada is a '94 build bike but UK registered in March '95 with a "M" plate.
Yes, but I wasn't sure which grips you were referring to.
Yes. The OEM grips will produce approx twice the output of the replacements. FYI. Watts = Current X Voltage = Volts squared/ Resistance
When the starter button is released the magnetic field created in the solenoid's coil collapses. The induces an electric current to flow as a...
The clutch cover is 1100 but the exhaust looks like a Termi from the 800
Normally level measurements are made with the spring and spacers removed. To do this you'd lose some of the fluid.
