Separate names with a comma.
I've had a hell of a job getting discs off Ducati wheels sometimes. Heat and an impact driver usually does it but in your case buying another disc...
Ha Ha! I like that [IMG]
[IMG]
Thanks for the support Jeremy. Some people, it seems, are not interested in information if it appears to conflict with decisions they have already...
"The job entails sourcing, blending and roasting coffee for use in all Tate Eats' sites and managing the Hot Beverage Team that is responsible for...
I have never used tipex on the belts. IMO it a waste of time, suggested by people who don't really know what they are doing for people who haven't...
Thanks O@Old rider. Let me be quite clear about this. I had and have no intention of "crabbing" any manufacturers products. I was trying to pass...
B&C Express are not a rival company. They supply both Renthal and JT sprockets and others. This is from their emails when I enquired about a...
Fair enough. Not my drawing board. This was the information provided by B&C Express who are generally well regarded as a supplier of chains and...
Some owners have fitted aftermarket grips but used the OEM wiring retaining control through the switchgear.
Ducati speed sensors are only 2-wire!
Since it is under warranty that's the best thing to do. Let the dealer sort it.
The connection for the pass lamp is made inside the LH switch. There is obviously 12V going to the switch because the horn works. So the most...
No worries. You have to start somewhere. Interestingly I've always found the fusebox on Ducati much easier to locate that on many Japanese bikes...
C'mon man, surely you can find the fusebox. I told you which fuse in my previous reply. But, if the horn, brake lights and pass lamp are on the...
That is a TM connector and won't fit the OEM solenoid. My solution for my 907ie was to buy a generic solenoid with a flying lead, cut off the...
Cold starting requires the correct air/fuel ratio for a cold engine. My ST4s would fire once but not catch if the fast idle wasn't used from cold....
Check that your horn are brake lights are working. The pass lamp button supplies a 12v feed to the main beam output of the dip switch while it is...
It might not be just the cable that need lubed. Make sure the butterflies snap back with the cable removed. It sounds like it needs the whole...
I was probably the first to use this method, must be over 3 years ago now. I used a reciprocating saw and went through a few blades.
