Separate names with a comma.
I found a coil kit cured my SS starting problems, as far as flooding/fouling was concerned. The other thing would be a starting circuit cable...
Is there a solid sleeve around the perforated pipe then?
I I ordered a supposedly thin wall socket off the inter web but it didn't fit, so I ended up filing the corners off the standard Ducati plug...
T That works ok on a desmodue, Haven't heard of anyone doing it on a desmoquattro though.
I have bought a special microphone for my iPhone, so I can get it in nice and tight to the belt, can't report on it yet though, as I haven't used...
Is it unbearably loud?
Yes, the fact that Ducati recommend Shell probably has less to do with excellence than with a mutually beneficial deal.
Mobil 1 comes up again and again in discussions about the best oil, I think that may be what's going in my (dry clutch) motor next time ...
Too much information? :D
I did read somewhere a suggestion that 4 stroke m/c oil may not necessarily be the best thing for our bikes, as it is largely formulated for wet...
Arctic roll? ;)
Should only be worn tabs and maybe grooves cut into the baskets. Quiet clutch should eliminate any backlash resulting from that :)
Many would say the 10/40 is better anyway, as it's still way too thick when cold and no thinner than 15/40 when hot
For a less costly but still high quality UK alternative, try Racebolt.
What more do you need? Ideal...
Sintered plates have bits of metal embedded on them. Useful if the plate is aluminium cos you can still pull it out with a strong enough magnet
I stuck Halfords fully synth 4 stroke oil in and it hasn't burned a drop. Is the 300v not a racing oil? I read somewhere that racing oil is great...
The clear pads they use on bicycles to protect the frame from cables and chain??
I too was persuaded to try the Suzuki clutch plates and had exactly the same problem. The tabs were just too tight a fit in my clutch basket and...
The mod relies on the fact that the basket slots are machined in such a way that there is a curved end to the slot. If you put a plain plate on...
