Separate names with a comma.
Even if you turn the crank all you have to is line up the dot on the bottom pulley with the line on the engine cover to re-establish the timing.
Have a read of this article and follow it exactly. http://www.bikeboy.org/ducati4vthrottleb.html
I had mine ceramic coated inside and out so I know for definite. I can't be sure for the later models though.
The silencing in the full Termi system is all in the end can which is a straight through absorption type. There is nothing in the link section....
I had fancied fitting bar risers to the Supersport to slightly improve the already very good ergonomics but was bit put off by the £80 price being...
I'm aware of that Pete. I can understand why there is an increase in perceived risk if there is a bigger percentage of accidents or thefts in a...
Undoubtedly but they are much more expensive. That said, because they are precision made they will need changing far less often.
Admiral may or may not be increasing premiums due to speed awareness courses but what they are doing is increasing premiums of drivers involved in...
Good advice there Nelly. I find the same thing with half-rings but mainly it seems to affect the old 2V engines with 8mm valves stems and as you...
The 'checking' clearances is what they should be set to when adjusting them. The 'operation' clearances is the tolerance allowed before adjustment...
UPDATE: The injectors are Siemens - DEKA
For nothing more recent than the 1*98/848 unfortunately.
We have the Ducati part numbers, it's the Bosch part numbers for the 1200 he needs. I suspect he will be able to source them cheaper from a Bosch...
Does anyone know the Bosch part numbers for the injectors on the 1200 Monster and Supersport 939 or Monster 821 models? Or does anyone know where...
I don't think the blackening is an issue, they seem to be well soldered to the board but some of the contacts look to be a bit pitted. A clean...
Sorry, I don't know of any way of lifting the tank without removing the beak and all the panels. This picture from the wiring diagram might help...
Owners who fit Dynacoils usually use those with a 3Ω primary resistance.
I hope you managed to convince DVLA at least. Thanks for all the interesting info above.
I had the same issue on my 2010. It had started under the hugger in front of the tyre where it gets blasted by shit thrown off the tyre. It then...
Yes, but why wreck a perfectly good speedo drive that could be used for something else. The spacer was cheap, did the job neatly and didn't...
