Separate names with a comma.
If it doesn't flow at a quite high rate out of the outlet it is probably seized. Separate the pump from the flange assembly as this will give you...
The pump is normally submerged in fuel but I don't know if dumping it in a bucket of water is a very good idea. It should be produce about 6 bars...
I got the heat shield fitted today along with the heated grips. No wonder the grips are so expensive. I though that on the RH side the twistgrip...
Here's a picture from the parts list. It is item 27. [ATTACH]
Yes, it's not an uncommon issue on Ducatis. The one on my ST4s broke at about 25,000 miles, the one on my Scrambler broke at around 1,600 miles...
These are the wrong size. The bearing is 35x55x14. The Koyo 32907-JR is correct.
I sold my 2010 earlier this year with 42,000 on it. The new owner has just come back from 3.5K mile trip over 9 countries in Europe in 9 days and...
The ECU sensors, including the speed sensor all use the same ground. It might be worth checking the ECU ground.
The pannier liners are now sold :)
PM sent. ET, I'll let you know when the deal is done.
For the OPs info, the alternator nut on the ST4s should be replaced every time and torqued up to 270Nm with engine oil as a lubricant, according...
Next week I'm taking my bike to Ducati Glasgow for the heated grips to be fitted so I thought I'd be proactive called them yesterday to ask if...
https://www.boosterplug.com/shop/frontpage.html His free Motorcycle Fuel Injection book is worth a read too.
Aye, but Exige is selling cables to replace the OEM battery earth and starter cables, not charging circuit cables as far as I'm aware.
Maybe I'm the one not keeping up. Both batteries and regulators have been discussed. You brought up the question of cables but since the advent of...
Agreed. What's that got to do with the battery??
I'm sure it is and the cables should be large enough to carry the maximum current required with capacity to spare of, I'd have thought, at least...
The Panigale regulator is the same Shindengen MOSFET that has been fitted to the MTS1200 since 2010 and is fitted to quite few current models...
Looking at the pictures again and see that the top picture has a similar arrangement to my 907ie where the filler flange is held to the tank with...
Hmm. It does sound different.
