Separate names with a comma.
I think ceramic coating is supposed to and it's not so very expensive...
Wi Will nickel plating eliminate the discolouration then ?
@antonye says his springs are same spec as oem. I'm using six and the clutch is seriously light due to the reduced preload resulting from a very...
The old first friction plate sits down into the rounded portion of the bottom of the slots and below where the first plain plate would normally...
Just tried the quiet clutch mod suggested by Old Rider. Fantastic difference, so good that I might get a ventilated clutch cover again. I was...
I have a mega-light clutch on my 999. I'm using stainless Avanti springs but they are supposed to be equivalent to oem, so that shouldn't be the...
I'm going to muddy the waters and give you an alternative. If you like the classic Ducati dry clutch 'music' and don't mind changing your...
err no... :)
The other brilliant feature of your triangles is of course that not only do they tell you that the number at each side of the base of the triangle...
I use oxalic acid based products for cleaning my cat. It takes the nasty brown stains out and brings it up gleaming white again. I have some in...
I guess enough reduction in resistance is enough and considerably more than that has diminishing returns. No doubt overkill makes for effective...
I'd be inclined to make the most of your misfortune and fit a bigger motor. Fit like for like and you're back to square one having spent a load of...
H Have you tried @Exige 's website? He'll sell you some excellent belts at a very good price too...
I also found it virtually eliminated free play, which I like. Did you find this too?
My recollection of blue printing is that it was a technique employed by racing divisions of large manufacturers to get the best engine they could...
[ NGK plugs all have the hex flats in the same place
Btw, if you fit NGK Iridium, don't reduce the preset gap!
I have the American kit. It consists of battery negative to earth, battery positive to solenoid, solenoid to starter motor. So 3 leads in all. I...
After much deliberation, I fitted NGK Iridium plugs to my 999 and they work perfectly. The idle is steadier and I get better, smoother drive from...
Not for me.
