Separate names with a comma.
Back in 2005 or thereabouts Ducati changed the way that the HP was measured. My then ST4s jumped from 117bhp to 120bhp, yet there were no changes...
No need to remove the tank. The lower black plastic piece below the tank on the LH side is all you need to remove to access the connector.
I've used various breakdown providers in the past but now get the cover with the bank account. I had a Nationwide Flexaccount which I upgraded to...
Don't worry it's quite normal. The coils are supplied with 12V and the spark is produced by the ignition modules breaking the circuit at the...
Make sure you have the V5 for your bike with you. A friend got to the border with Ukraine from Poland and was asked to produce the registration...
Sorry about the brief reply last night. I was using my phone and only had a minute. You can also buy many JST waterproof connectors from CPC and...
Kojaycat
I believe that's the case on the Darmah, possibly the same on the Pantah. @Pete1950 should be able to give you a definitive answer.
These charge warning devices are notoriously unreliable. The one I have is a Ducati Elettrotechnica but the one shown in the diagram is a Motoplat...
Yes, the grips are wired in series
The heated element itself breaks down, usually with a small portion burning out. Some enterprising owners have managed to bridge the break by...
The OP is talking about the actual injectors. Your pictures show the throttle bodies which the injectors are fitted into - the green plastic bits...
No. Some earlier 748/916 models had a wiring link where one could be fitted to comply with racing requirements but as far as I know Ducatis have...
Well remembered Mr Fox. They still do side stand modification kits.
Its a few years now since I had a 900SS but, as you suggest, a bolt with a lower profile head should do the trick. Possibly one with a button...
Jeez! I must be famous ;)
Cut the projection of the side stand bolt so that the plate clears it. There should still be enough of the hex socket left to undo the bolt.
Thanks Loz, that works a treat. I'd looked at that very thread previously and missed the bit about the SD card. Strange how it will import a .itn...
Thanks Loz. I'll have a read through and see if I can make any sense of it.
What thread Loz?
