Separate names with a comma.
Simple arithmetic is all you need.
I have a diagram for the 848 but the wire colours are unreadable. This one from a 1098 is the same and legible. When the starter button is pressed...
[IMG] One I took a couple of months ago.
It was the rear Speedline on my long gone 1978 900SS that cracked. The Pantah has FPS wheels.
If the headlight is staying on then the ECU is either not getting a signal from the starter button (grey body connector pin28, white/blue wire...
That one on the left is a Speedline. I hope it's not cracked - mine did :(
Agreed. If the sprag doesn't grip the starter spins. If the sprag is on it's way out it can grip initially and then slip, making a horrible clack...
Since it will turn over when you short the solenoid terminals three battery must have sufficient charge to crank the engine. The starter is...
Triumph maybe? :smirk:
I'm not sure how or if that could achieved. it would require some sort of voltage activated switch built into the battery and it would need to be...
I'm not familiar with that particular lamp, so maybe it does have a shield but god knows what for. As I said above the high beam pattern is of no...
The main beam lamp has no internal shield. It will make no difference to the beam whichever way up it is. The main beam direction is not part of...
They haven't got a very good finish to start with and rapidly turn dirty brown. I found that after polishing them they stay looking good for much...
I've never used these tools. I tighten the pinch bolts on the opposite side, torque the axle nut (30mm), then loosen the pinch bolts again and...
I bought a metal polishing kit from thepolishingshop.co.uk a couple of years ago. It was great for polishing the pipes on my Scrambler. [IMG]
Here is a drawing for spacers. The drawing shows them at 2.5mm thickness. You could use 2 per disc or simply get them made at 5mm.
Use discs from R model or standard discs with 5mm spacers?
I got it out. A fair task though. Nothing would shift it and, as I thought it would the hex rounded out. So I used an airsaw to cut through the...
I had a similar set up round the corner from where I used to live. With old, mainly untaxed, cars parked all over the place it was hard for the...
It's a manual that I downloaded a few years ago. Here is a picture of the connector on my bike (it looks horribly grimey). It is tucked in front...
