Separate names with a comma.
These bikes have an idle control valve (stepper motor) located below the throttle bodies which controls the idle speed. It may be sticking and a...
[ATTACH] This was my first cafe racer pictured in 1976, it was nearly 20 years old at the time. Cafe racers have been around a long time.
Looks good and should be very effective
The 848 already has a lighting relay but after the relay the current goes through a load connectors and switch gear before it arrives at the head...
I've never been on a channel ferry but I've used the North Sea ferries a number of times. On these there are ratchet tie downs and you tie your...
I wouldn't be happy with anyone tying my bike down with a strap across the seat.
It was probably the green ones, it was a long time ago.
Nah. I think paint thinners is a better bet. Many years ago, my wife to be thought she's help clean my bike and scratched the chrome on both the...
Yes I know, but when I was replying the OP hadn't at that time succeeded in posting the diagram. I found a similar one for the same bike on-line...
Wire wool should scrub it off but you might end up with a shinier bit and end up having to do the whole lot :D
My son is selling his 2008 1098 because he wants to change to something newer. The bike is in immaculate condition apart from the usual stone...
I don't have that bike now but they were the OEM plates with an open cover.
I discovered the results of a loose battery terminal this weekend. I was at Scottish Ducati Club event at Fort William and the bike ran with no...
There is NO pressure sensor. See post #41 above.
All the auto-electrical standard numbers are listed here - DIN 72552 - Wikipedia, the free encyclopedia
You can't easily test a condenser. If you connect a meter reading resistance to the condenser it should read a value which will increase as the as...
Ah. I see it now, different diagram but same idea. 15 is the standard number for the +ve ignition feed, I'd connect that one to the magneto and...
I think I've found your diagram online. And yes, one side of the coil is connected to ground and the other to the magneto coil. Although not...
If you posted the wiring diagram it would help! Coils usually have one terminal marked "+" and the other "-". If it's a negative earth bike the +...
The pump runs all the time the engine is turning, whether it is firing or not. It runs for 2 or 3 secs at switch on then the ECU closes the relay...
