Separate names with a comma.
Yes, just ground sender wire and the bulb should light. If it doesn't the likelihood is that the bulb has gone. If it does your sender must be faulty.
Screwing it out will only increase the amount of free play before the lever begins to move the piston. It will not alter the rest position of the...
Hopefully you can see them now. Google photos is driving me up the wall with their sharing options.
No. The grub screw sets the return position of the piston. If it is adjusted too far the piston will not uncover the bleed hole that allows the...
Possibly Delphi Metri-pack or Econoseal
All sorted now and back together. [IMG] [IMG]
Glad to hear it was an easy fix :) Incidentally, I don't think any 748 ever had 2 sensors, only the 916 with the P8 ECU. I may be good at...
Crank sensor disconnected? Or if it is an older model with 2 sensors try swapping the connectors.
Yes Pete. From the same supplier.
Thanks @Pete1950. You are quite correct, I'd noted it down wrong.
You should be able to see the pics now @Pete1950. It's confirmation of the pin out to the connector that I really need. The wires were in such a...
I'll reload them so hopefully you can see them Pete. Google have recently changed the sharing options in Google Photos and it's caught me out a...
Things are coming on slowly. The tank, seat and fairing are off to be painted. I get it done by a local car body shop where I've had paintwork...
From the MTS1200 Technical Manual : ABS functionality is disabled at vehicle speeds lower than 5 km/h. Also : Warning If the vehicle front wheel...
I think it is a much lower speed than that, about 5 - 6 mph. The ABS light goes out after a start up when the bike reaches about walking speed....
Sorry, I have no idea. These were the figures I found.
I've found it in a German workshop manual. 457cc or 79.4mm from the top for the 600 and 750 440cc or 108mm from the top for the 900 Measurement...
Good to hear that you got it out. That plug is certainly corroded, mine have never looked like that, although the corrosion appears to be around...
Not entirely but the increased height makes using the pedal much easier and I can get the ABS to kick in :)
This was my solution [IMG]
