Separate names with a comma.
Most car engines that I have dealt with have thermostats which open around 80º - 85ºC. The Ducati thermostats seem to open much lower than than. I...
Yes, I always get much better consumption figures when in warm temperatures on the continent than I get in the cold climes of Scotland.
If you want to find out the ideal tension support the rear of the bike so that the suspension is unloaded. Remove or undo one end of the rear...
The swinging arm is most definitely painted. On my 2010, corrosion was spreading under the paint and lifting. The problem is that the section in...
All of these features depend on the speed sensor producing a signal and its signal matching that from the rear wheel sensor. If it doesn't they...
Agreed. It's a useful book. I've had my copy for about 45 years and still refer to it now and again but as you say Steve, things have moved on. As...
Ha Ha! Why am I not surprised? I thought I'd give it a go anyway. If it doesn't work I can use one of these which I highly recommend. I have one...
Well I got the swinging arm shimmed down to 0.1mm by making a few assorted shims. I then stripped and rebuilt the electrics panel that mounts...
That's my thought's too. The manual is vague and unhelpful about a lot of things.
Thanks Pete. I thought you'd have the answer. :upyeah: This is just one of the many problems that turn up when rebuilding a bike that was...
I'm still waiting on a 1.6mm opener shim so that I can get the horizontal head back on. In the meantime I've got fed up waiting and decided to...
Start by changing the relay for a new one.
I have no idea. But in "Tuning for Speed" Ch13. p.141 Phil Irving says - "Various formula have been proposed for determining the best inlet length...
I can't say that I've noticed the mirrors being unusually viby, but I've only ever ridden V-twins or singles for the last 40 odd years [IMG]
Possibly speed sensor at rear wheel or the connector to it. Check the connector first, it's at the rear of the crankcase on the clutch side, close...
This excerpt from the Paso 750 FAQ on ducatipaso.org might help. Repairs to the clutch slave cylinder: viewtopic.php?t=626...
I'd assume that it's similar to the hydraulic clutch on the 750 Paso engine. It has a bearing inside the piston and what they call a bush inside...
There's a needle roller inside the gearbox shaft. It's possibly collapsed.
No, not overfilling. I'm not familiar with the tank breather arrangement on the 821 but on many Ducatis there is a rubber seal at filler and it...
Tank breather?
