Separate names with a comma.
Headlamp level adjustment is mandatory on cars these days and should be on bikes too in my opinion.
Just about any switching diode would do the job. As long as it is rated higher than 12V and more than 1A. A IN5401 or IN5404 should be fine.
To wire them Front + Back you'd need to add diodes to each indicator otherwise for normal operation they would all light up like hazards. You need...
Have you correctly identified the supply and ground to all of the indicators on the bike? If you get any of them the wrong way round the fuse will...
Does the starter turn if you bridge the solenoid terminals? If it does the problem must lie in the solenoid itself. If not it can only be the...
They are indeed pressed in. When I've heard of people trying to remove them they usually end up breaking the glass. I guess if you heated the...
There is no load on the pins. They are only there to stop the pads from falling out.
An update on where I've got to. As I said above I've had the frame, swinging arm, etc re-powder coated. I've decided not to strip the engine but...
KTM parts for coffin type master cylinder
PS 16 rebuild kits seem virtually impossible to obtain but check out KTM. Most of the seals, pistons etc are available from KTM dealers and many...
Ducati Paddy ?
Sorry to hear this. When I ordered the socket, 2 or 3 years ago now, I received it within a fortnight. I had heard recently on Ducati.ms the...
Yes it should and too high a voltage will cause similar problems with the dash. A mate with a 1098 Bayliss Rep had problems after fitting a Shorai...
If anyone is interested I've created a colour wiring diagram for the 500SL. The colours make it much easier to follow wires.
No, only the air-cooled models do.
[ATTACH] Here's the later 2 piece one, complete with temperature sensor. It seems to have been introduced across the range for 2001. The ST4...
Around '98/'99, probably with the introduction of the 3-phase crankcases, the filter screen changed to an internal screw in unit with a 14mm hex...
That's what I'm thinking too and it sounds like it has become detached from the head.
[ATTACH] Which bolt did you take out?
That's what I'll do when mine eventually fail (Still working after nearly 6 years!)
