Separate names with a comma.
The M-Unit is great idea but a helluva price though at 259€
A friend and myself both have 2010 bikes, both are still on the original batteries which will be coming up for 6 years old soon. My bike lives in...
Well it's got holes Pete, but none of them seem to line up with the starter motor screw. Thanks for your advice on the starter, sounds like it...
I got the frame back from the powder coaters yesterday. They made a fantastic job. They stripped it back to bare metal and re-coated it. Properly...
Sorry, you're quite correct. :rolleyes: The clutch cover will fit straight on, the only difference is the colour is a different shade of grey.
It would but you'd need to blank off the water pump drive. it would look a bit weird.
I'd have just made a new loom from scratch.
Admittedly I'm much more familiar with the operation of slide carburettors, Dell Orto and Amal, but nonetheless the main jet shouldn't come into...
I doubt if the poor running is related to the main jets. The bike will reach 4000 rpm with no load or a light load long before the carbs are far...
I don't fancy the chances of that thing focussing on the road, the light will be scattered all over the place. The headlight reflectors are...
FYI chaps. The Mikuni and Factory Pro jets are numbered according to the size of the orifice. So a 140 main jet has a 0.140mm dia hole in it....
Hard to picture but I think that makes sense. it sounds like all the fuel to the injectors goes through the second filter, which it should.
The pictures don't make it very clear and the pump has two outlets which in itself is unusual. For any injection system there should be 2 filters,...
That may have been the case back in 6V days in over 40 years motorcycling I've never seen nor heard of a motorcycle specific H series bulb.
The distance of the socket from the ring part of the spanner isn't critical. What is important is that the torque wrench must be at 90° to the...
I'm not really surprised and I think there is far too much obsession with getting exact tension values.
The smaller circumference of the 190/50 may also cause an error with the ABS
Also fitted to the Paso 750, 906 and the 907ie.
Correct. The crossover shaft turns at half engine speed. Get yourself an engine turning tool, it makes life a lot easier when changing the belts.
Actually there is valve spring tension to overcome. At the timing position the inlet valves are fully open and the closer springs are trying to...
