Separate names with a comma.
Chris is a top man, he gas-flowed the heads on both my 916 and Monster and dyno-mapped the 916 with great results. Highly recommended. :upyeah:
I've got a couple of air-powered impact drivers, the first wasn't up to much so I bought the second which is (claimed to be) more powerful but...
I used Dirko HT red sealant; https://www.elring.com/products/sealing-compounds/dirko This was on recommendation of the company that re-plated...
Don't know if similar applies to the SS but on my 900 Monster, the chain runs very close to the edge of the tyre. So close that if the chain is...
Agreed, going to be difficult if not impossible to re-seal it, best option is to replace it (they're cheap enough) and with a good sealant but, as...
You sure you've got that the right way round? sounds arse about face to me.
So you don't fit the tyre backwards.
Could be valve clearances but, could be something more serious, especially if oil consumption is up? I had a BMW 323 (car) that suffered from the...
Disconnect the wire from the oil pressure sender, if the light goes out then it's likely the sender but if not then the above mention of the dash...
Platform/table is the best bit of kit I ever bought for bikes. I do all my own maintenance and prior to having the lift table, adjusting front...
Worth considering a 'digital torque adaptor' basically a device you stick between your socket and the lever. It shows the current applied torque...
Agreed that 4L doesn't quite fit. I've had mine apart, fully drained, completely dry, even emptied the oil cooler and lines and I've never quite...
Still, it might knock the rust out of your tank while it rattles about...
Made from lead as a kind of lead replacement fuel additive... :thinkingface:
Don't know about the SS but, on Monsters with the same engine and carbs, there are some little plastic pods that the carbs vent into. I believe...
I think it probably leaked from the outset, it's just I stopped for petrol 12 miles from home and watched the bike pissing itself whilst I was...
Coincidentally, I have just fitted a new Rosso3 rear tyre to the 916 this afternoon, the old one was showing the cords around the centreline......
