Separate names with a comma.
TPS being wrong can cause over fuelling. I'm not saying that's the cause but I'd be making sure everything is setup properly before buying...
Have you checked the TPS baseline voltage setting and, whether it increases incrementally/smoothly? Try 'wiggling' it with a voltmeter attached...
Been with Saga for the car a few years now :( and last year they tried to increase the price but after calling them they actually reduced it...
Renault Clio but, as above I think a lot are now. Started out with an oil leak from the gearbox, actually hydraulic fluid, topped it up a couple...
You would think so but, the total cost for me to repair it including all new valves, gaskets, belt, tensioner, water pump and even the camshaft...
5 bolt discs have different offset and 999 has no speedo drive fitment. 916 series have 6 bolt disc, never seen a 3 bolt?
Any good? https://we.tl/t-DdYzLhUR7A?utm_campaign=TRN_TDL_05&utm_source=sendgrid&utm_medium=email&trk=TRN_TDL_05
Can't compare now as the car belt is gone but the CCW belts look fine from every inspection, the only sign of wear is the 'polishing' of the back...
Sorry, should have posted a pic of the teeth side - that's what matters really. [IMG] Look very good, no cracking or deterioration that I can...
Given that they shared many parts in many engines then probably so but I wouldn't know for sure. Hopefully someone more knowledgeable will be...
Just changed the belts on both the M900 and 916, both CCW belts and both been on 5 years, 6k miles on the Monster and 3k on the 916. They...
Different alternator and crankshaft also, doesn't use the same ignition pickups although the mounting points may still be there? but you'd need to...
From memory, my M900 intake manifolds are held on with stainless, nyloc nuts and the nyloc's been fine for many years. Also, no flanges as there...
Yes, as the tank 'saddles' the frame you need a tap on each side to use all the fuel. I had a 250 Scrambler back in the day and, due to being a...
Heat shouldn't be too much on the intake side, that said if you want locking nuts and are worried about the heat, you could use Fuji nuts that...
[IMG]
Flange nuts, spreads the load better than a standard nut so you don't need a washer. Available with or without serrations and with nyloc inserts...
