Separate names with a comma.
I was thinking I should upload the descriptions as well but you've gone and done it for me. Thanks
Here you are..[ATTACH] [ATTACH]
I did the mod but didn't use speed bleeders. Worked for me.
That key is a JMA ZA14P, listed for Aprilias. It can carry a transponder chip but doesn't need it. I got one from my local locksmith for a tenner...
I am certainly interested but will be even more so when you have a product that will cover the Mitsubishi and Siemens ECUs ( I have bikes with...
I have a 2010 and your welcome to try the BBS from it, but I live in NE Scotland.
That should probably confirm it but on the 2013-14 models it also holds the mileage info which is used for resetting the mileage on the dash if...
No. In the manual it is referred to as a Vehicle Control Unit or BBS (Black Box System). It is located next to the ABS unit, in front of the...
And the output of the relays goes directly to the lamps and is suppled from the front fuse box which in turn gets it's power from the main fuse at...
I don't have the pin numbers I'm afraid but the wire colours should be; Black - permanent ground to one side of the relay coil (pin 85 or 86)...
The front indicators are driven from the dash, the rear ones from the BBS unit with Canbus communication between the dash and the BBS. I suggest...
Take it off the output of the low beam relay i.e the low been feed (white wire). That won't affect the CAN bus whereas a connection to the relay...
Yes, they are polarised so they only fit one way.
I've got an Optimiser 900. My Multi and my 907 both came with "Optimate" connectors already fitted and they look exactly the same and fit no...
Let's hope it stays fixed :upyeah:
No. Closers are available from 2.20mm to 4.50mm in 0.05mm increments and openers from 1.80mm to 3.45mm, also in 0.05mm increments.
No please don't. Your ideas are perfectly valid :)
Perfectly clear to me OR, that's why I've given the instructions on how to get into the connector.
I must say I'm surprised that a seized exhaust valve could cause the bike to run on one cylinder. Or was it? Perhaps it just seemed to be.
Yes, you'll need to remove the textile insulating tape ( I haven't seen stuff like that since the sixties). If you hinge the locking clip back...
