Separate names with a comma.
It would need two switch faults before the starter wouldn't work with the bike in neutral and the neutral light probably wouldn't work either. The...
This is correct. The ECU will only allow the starter to operate if: The bike is in neutral The bike is in gear with the stand up and the clutch...
There are 2 wires to the solenoid connector, a red which should be live with 12V all the time the ignition is on and a grey/green that the ECU...
My ST4s came with one of theses K&N filters. When the time came to change it it wouldn't shift and the nut on the bottom just tore from the...
With this kind of result - [IMG]
I'm not sure that they are, but if so you should still be able to measure a voltage across the contacts of the open circuit grip but not the one...
Quite bit in here. And at least a few people have replaced the Ducati grips with aftermarket grips or heating pads.
I've never measured the voltage but the resistance of the grips on my MTS is 7.5Ω but they are 10.5Ω on my Scrambler. I'd expect the voltage to be...
Cleaning them with Wonderwheels alloy wheel cleaner every 2 or 3 weeks will remove the bronze colouring. Watch where you get it though. It will...
I anticipated that so scribed a line to mark the selector's position before loosening the screws.
The TPS won't make the dash reset.
Sounds more like a duff connection than a duff battery. Are you sure all the connections are clean and tight.
I'd say that 12.3v is bit on the low side. A good battery should be showing more like 12.7v. More important is what does it drop to when the...
Not the relay then. Could be related to the stand/neutral/clutch switches or the immobiliser.
I'd have thought that it's much more likely that the magnet has been broken at a service. There is nothing that it could contact in an accident....
I must get up to date on the later dash/ECU set up :rolleyes:
If it's a brand new one I'm sure there is a one-off procedure for coding it to the keys. If it's 2nd hand you are stuck with either getting the...
I now realise that by single valve shims you probably mean one shim. I thought you mean't shims for a single but since they aren't 8mm you must be...
Lacey Ducati
Not ideal I'm afraid. The pictures weren't taken with the intention of showing off the carbon. [IMG] [IMG]
