Separate names with a comma.
Any update on this?
You need to get a (free) licence from JP to enable them. Paste the ECU info displayed in the JPDiag window here
And I thought it was just me :D
I beg to differ John. I had the peg cut off and welded higher on a spare damaged pedal that I had. I have also fitted SBS pads and bleed nipples...
Motomfg do one for the Hypers which also use Marzocchi forks but the told me it doesn't fit! Ducati Hypermotard "S" fork cap wrench I used a...
Fuel line came off inside the tank? That would explain the change to the sound of the fuel pump.
I wouldn't advise that as it comes pre-diluted. Any water added is going to dilute it further. You can buy a 1L bottle to top here Permanent Spezial
All recent Ducatis, and I'm sure that will include the 848/1098, have a flat cut-off. So legal in both the UK and the EU. Easy to check, just...
I have a 2010 with a full Termi system. I spent the first week of June riding about 1000 miles on a 1200 DVT. I am in absolutely no doubt that the...
530, 525, 520 all have the same pitch of 5/8". 530 is 3/8" wide, 525 is 5/16" wide (2.5 x 1/8") and 520 is 1/4" wide (2 x 1/8"). I wouldn't bother...
Something has come into contact withe pulley to cause the burring on the edge but the cause is obviously no longer there. Wonder what it was?
Sidestand bolt just arrived, it looks really good. I'll get it fitted this afternoon. Thanks Alan.
Someone was asking about removing the cat from the stock exhaust the other day. If you want to, here's how it's done : Removing the CAT from your...
I found that as long as the battery wasn't disconnected for more than 10 seconds or so no settings were lost.
Same here.
Someone on Ducatims did a write up with pictures on gutting the cat. It involved cutting a hole in the bottom, removing the innards and welding it...
The OEM disc is designed to be 5mm thick, the Galfer 4mm. It should have a minimum thickness stamped on it, possibly 3.5mm. If it states "Track...
The nuts hold the cush drives to the sprocket carrier. To change the sprocket you undo the big nut in the centre after removing the circlip and...
Got the one for my Scrambler yesterday. They must have sent a whole batch out all at once.
There is a removable tray (I can't think of what else to call it) under the seat for the high position. To lower the seat you just remove the...
