Separate names with a comma.
On closer inspection, put me down for one too.
I'm swithering. The bike is just gone 5 years old with coming up for 35,000 miles but the play in the sidestand pivot is negligible, about a mm.
I also changed the front sprocket only as it was showing slight signs of wear but the chain and rear sprocket were still in very good condition....
Apparently the trick is to turn the headlight on for a minute before trying the starter. This warms up the battery to allow a higher current output.
Ah! Of course.
Depends how flat the battery is. As long as it has enough power to run the fuel pump and creae sparks you can. I once left the parking light on my...
There is a small needle roller inside the gearbox mainshaft at the clutch end supporting the pushrod. The needles are most likely out of this....
It's meant to be like that. It's the atmospheric vent to the pressure regulator. Some applications take s pipe from there to the inlet manifold...
I just got mine off ebay. 4.3K is white, 5K is blue/white and 6K is definitely verging on blue.
Canbus ballasts aren't necessary and I'd advise a colour temperature of 4300ºK. Your eyes are more sensitive to yellow light than blue. Although...
No chance.
it could be worth your having a look at ducatipaso.org - resource for Ducati Paso 750, 906, 907 IE, 750 Sport . There is a lot of knowledge and...
You mean it's even smaller than the YT12-B4 fitted to the old model and nearly every other current Ducati?
Stein Dinse in Germany do them at a good price Duc Anlassermagnetschalter 600SS-916 - Stein-Dinse Online-Shop
Found it.
Where?
The side stand switch on your model only lights up the warning light. It has no effect on the starter or ignition. Fuse no. 1 is the main fuse...
All ST4 models use the IAW 1.6M ECU. The ST4s however uses the IAW5.9M. JP at one time provided a software named DucatiDiagOld which would...
This is the original thread, hopefully it might help. MTS 1200 ABS problem - could be worth checking | Ducati Forum
I'd remove carbon canister altogether and use it's vacuum connection for the Scottoiler or you could quite simply fit a tee in the tube from the...
