Separate names with a comma.
The base gasket is more of a shim than a gasket. It will be difficult to seal without 3bond and you have nothing to loose. If you put it together...
Threebond
The revs fluctuating from 1400 to 1800 suggests that it might be related to the idle control valve (stepper motor)
If you get a nail in it on a 70mph bend you'll soon know that it matters. :Arghh:
Yes, but twice the secondary imbalance although acting longitudinally it shouldn't be obtrusive.
I run a full Termi, initially with the baffle in but everyone told me that it sounded strangled and I had to agree. I now run without but take...
They are 10mm ID. These would do the job: Copper crush washers suit 10mm or 3/8" banjo bolt brake | eBay
Ruined with that heatwrap :Vomit: otherwise I quite like it.
I don't know. There is nothing on that fuse that is only active when the engine is turning. Perhaps a wire has got crushed and 2 circuits are...
I'm now fairly sure it's the battery, try a new one.
Here you are - [ATTACH] [IMG]
The fuse blowing will be connected with either the horn, brake light,or headlamp flasher circuit, most likely the brake light. Check all the wires...
Sorry, I have neither price nor pictures. Price is not likely to be high. PM me, I'll give you his phone number and you can ask him about it.
Due to illness a friend has an S4RS (999) engine for disposal. It came from an accident damaged bike and is very low mileage (can find out exact...
Yes. The lip is just pressed onto the outer edge of the pulley, it's an interference fit. Just grab the edge of it with a big pair of pliers or...
From the manual- I believe it's the 3rd fuse from the left. [ATTACH]
Pull the lip off with a pair of pliers. I've done this to every engine that had them when I've changed the belts. The later engines didn't have...
