Separate names with a comma.
Or, turn it back a bit more than 90 deg and then turn forwards to the 90 deg position, you're only trying to eliminate any backlash.
Some years back, I was using the 'racing' clutch pack on my 916 - has thinner (and one extra) sintered friction plates and I removed 2 springs as...
What's the overall thickness of the 'pack'? I find that going slightly under the recommended (38.5mm IIRC?) helps with drag, especially if you...
On the old dry clutches it is not uncommon for the large 'star/snowflake' shaped washer to eat into the hub, meaning the hub is not held back as...
Both the 916 and Monster, over many years.
Never seen those thin plates, can't see why they would fit them? Personally I don't bother with any dished plates, just friction/flat plain to...
If it's a single wire (not multicore) then it's not some kind of proximity/sensor, sounds like a plunger switch to me. The older bikes (like...
Not sure if that's a definite marker? I've got Marchesini 10 spoke forged ally wheels and they have 8 holes.
I had some battles with piston rings on my Monster, problem being the JE pistons had chrome rings (at least the oil ring) and it buggered the...
To add, here's a pic of a shift drum I've got stashed away. The neutral indicator is the round headed rivety thing near the end (opposite to the...
Can't see how? if the gearbox is like that of a 2V/Desmoquattro (and I think it is) then there's a 'pip' on the shift drum that presses the switch...
I find the vice type of clamp on my table quite useful, not as stable as a roll-in but (by redrilling the base of the table to widen the vice...
Maybe there were variations? but then mine wasn't fitted to the bike when it was made, I bought the damper with mount aftermarket and so assumed...
To add, Harris appear to still be around and list a mount for 748/916/996/998 for £40 on their website though it is a 'Harris' mount rather than...
That's like the mount on mine. Not sure who made it, I would assume Ohlins? Mine came with it, maybe try an Ohlins dealer. When I bought some...
OK, I had it pictured in my head as more of an in/out cutout and further back than the squared off part, certainly not how I remembered it (OEM...
Surely a Biposto tray has extra cutouts for the pillion pegs? The one pictured only has the cutouts for the exhaust hangers...
Don't be fooled that a 748 is light, the difference in weight between a 748 and a 916/996 is only a couple of kilos (basically the oil cooler and...
A couple of mine fell out a couple of weeks after I bought the bike because the wheelnut hadn't been torqued up! Unfortunately, it buggered up...
