Separate names with a comma.
A good place to start would be to check the cam timing
If the brakes work ok and it's not leaking it should be fine. And yes to replacing seals.
My previous waterproofs were Wolf Titanium, they did look good. But they weren't as warm as the old Motomod I had before that. They were...
Halvarssons here too. The best waterproofs I've ever had by a long way. it didn't rain when I was in Belgium though :)
I've seen pulleys on 4V Desmoquattro engines with well over 50,000 miles on them with no problems and on 2V engines with over 100,000 miles and...
I've got these on mine from carbontrader.com - no corrosion issues [IMG]
You will find wiring diagrams here. The S2 isn't covered but the one for the SSD Darmah should be very close if not the same.
Well the cams run directly in the head in all the Testastretta engines. I'd never heard of an end cap controlling end float before though.
On these bikes a there are 2 independent Bosch electronic ignition systems, one for the vertical cylinder and one for the horizontal cylinder. The...
Mine is a 2010 ABS and as I said above I've never seen any blue LEDs. I spoke to friend with a 2010 S Touring and he's never seen any blue LEDs...
Could you supply a bit more info Fin? I presume you're talking about a bevel 900SS? The SS was discontinued in 1982 but the 900S2 was produced for...
Blue ring? What blue ring? I've never seen anything but red. My neutral light glows dim when any of the other warning lights are on and...
Al, As I understand it there are no bearings. The cams run directly in the head which itself acts as a plain bearing. Hence no bearings shown on...
I wouldn't have thought that there would any endfloat on the camshaft, or at least it would be shimmed for a minimum. The end cap is only a cap...
Tony, remove the 4 screws that you added the additional washers to. This will allow removal of the complete numberplate holder assembly along with...
If your bike is an older SS, Monster or an ST2 you need this tool Ducati valve shim measuring tools 620 600 750 800 900 944 ST2 Monster SS | eBay
That tool will fit the shims from the 4V engines and the shims from the later 2V engines with the 7mm valve stems. It will not fit the earlier...
Never tried them but they should work. I tried a homemade LED array from a previous set up to confirm LED indicators would work without ballast...
