Separate names with a comma.
You got that right :D
They come with 2 keys Fin, a black "active" key fob and a red "passive" key. The black key has a battery and talks to the bike from up to about...
Available from Palmer Products. £28.50 for the one piece and £42.50 for the 2 piece. [IMG]
The fuel pump not priming is another issue. Check the fuel pump relay under the seat.
Sounds like a lack of current available to the fuel pump. It probably sounds better at higher revs as the battery voltage rises which means the...
As well as upgrading the wires from the alternator I fit these Powerpole connectors [IMG]
They probably are. After 37 years I can't remember what they were. :rolleyes:
The previous owner of my 907ie had changed the belts according to the Workshop Manual, every 12,000 miles - no mention of 2 yearly then....
They had tubes. My previous 860GTS came new with Block C tyres
The picture was taken in the spring of 1979
They weren't old at the time :p If I remember right they were Metzelers, pre ME99.
If I pull mine hard the lever will just about touch the bar but in practice the wheel will lock up (well it would if the ABS didn't stop it) long...
I had the first of these UK Black & Gold 900SS's. I bought it off Coburn & Hughes as an "ex-demonstrator" with about 1400 miles on it. I found out...
Cheeky fecker! I was quoting from this thread Now that makes more sense
I'm not understanding this. The original setup has a flexy from the master cylinder permanently crimped to a hard pipe to the ABS unit. From the...
yes but the £20 minimum order is a bit of a nuisance. I'd forgotten about CPC, I used to use them a lot a work.
You might find them here Car Motorcycle Harness sealed and unsealed wiring loom connectors
Really? I grew up on bikes that size and they didn't seem like minimotos to me. The Scrambler: dry weight - 176.5kg (389lbs), seat height - 31.1"...
When I had the ST4s it developed a tiny weep behind the horiz exhaust cam pulley. I traced it to the sleeve between the seal and the camshaft that...
It will have a 1/4" hex that is a universal size for all of the interchangeable bits that are available.
