Separate names with a comma.
I got them from AV-V in Canada, bit of a mare to deal with as, like many US/Canada based businesses they seem to struggle with putting things in...
My M900 recently needed a new gearbox due to the 6th gear primary losing some teeth. Whilst apart I discovered the exhaust valve guides were...
Standard gearing is 15/36 I believe. Most increase the rear for better acceleration without losing any top speed as aerodynamics/power dictate...
Langcourts or Poetons will both do it right but, you might save some cash if you can find a good, used barrel? I had a KTM 500 (2 stroke, single)...
Is it loud? ;)
I've seen worse on various engines (including my Son's car!) and running fine. As it's a kid's bike, I doubt ultimate performance being...
Not sure why anyone would go to the trouble when the standard link pipe is exactly this? granted it has the 'silencing' bulge/thingy built in but...
My neighbour asked what was wrong with my 916 due to the rattly noise it was making - I told him it was a diesel, he seemed satisfied. :thinkingface:
Ride height will increase but only in the order of around 5 - 6mm, probably not alot more than replacing a worn tyre with a new one? Whilst it...
I very much doubt that there is any difference in tyre to mudguard clearance between M600 and M900, pretty sure the mudguards etc. are the same....
If you have an endoscope camera, you could probably get a decent look at the gears through the side of the engine under the cases without much...
Hopefully nothing that serious. I removed the clutch plates and the chain/sprocket so that I could spin the gearshaft freely. Used a socket onto...
When it stops, is it an engine stall or the gearbox jamming causing it? Asking because (not wanting to worry you) my Monster sheared 4 teeth off...
I switched from Arai to X-lite a few years back - another satisfied customer, as it's carbon fibre it is much lighter (with the possible exception...
Mine looks nothing like that, just the one frame mount; [IMG] To add; it's an SD1222 not SD122.
OK, not sure why I got that model (can't even remember where I got it?) but I can confirm that it fits fine and has sufficient stroke end to end...
There appear to be several models that fit. The Ohlins on my 916 is stamped 'SD1222', don't know if that helps...
[IMG]
