Separate names with a comma.
When I had my 916 gasflowed, on initial startup after rebuilding the engine it ran like shit - spitting back through the intakes etc. due to...
Mine came with cap head screws from new, thought they all did...
Likewise and never needed it either.
IMO mostly OK, I aim for 0.10 - 0.12 openers and 0.05 closers (definitely less than 0.10 and as tight as possible with no drag for the closers)...
Plus you will have done 90% of the job anyway so just fit new bearings.
Likewise, I think it was made of chocolate - use a proper tool or make one from old plates.
This is for a Translogic dash speed reading (with gear indicator) but would work for a gear indicator such as GIpro that can be bought with a...
Like this?...
I've used a guy in Leicester to do leather alterations, did a great job for me, don't think he has a website and not sure if he's still doing it...
996 exhausts are considerably fatter than 916. I would also think any variation in visible angle is more likely due to the seat sitting higher?
That's what my MOT tester told me when he thought the bulb on my 916 had blown. To add, it's an LED bulb as filament bulbs don't last long but...
You can but I wouldn't, mainly because by doing that the disc carrier is no longer held tight around the lip/rim of the wheel hub and, frankly it...
I've got a Translogic dash on mine; [IMG] I think you would be OK with the speedo drive if you use 15mm discs - they obviously stick out 5mm...
I've got 1098 Ohlins forks on my 916 so I needed the larger bottom yoke but other than that they are a fairly easy swap. As mentioned 15mm ofset...
Don't think they exist, all the OEM have the baffles and I highly doubt there's such a thing as an aftermarket 45mm system - what would be the...
