Separate names with a comma.
The ECU should be earthed by a flying lead with a ring terminal attached to one of the mounting screws. If it has come loose you will get exactly...
It's almost certainly fuelling related. I'd think a TPS reset might sort it out.
I'm not sure what you mean by " showing about one volt of two wires.." The yellow wire to the ignition switch connector (red to the switch) is...
Possibly the main relay located up near the fuse box under the top fairing. Also be sure to check the condition of the wiring to the 25 pin...
I was sat at the same table as Peter.
Not the EMM Andy, the Multistrada.net Belgium Bash. I spent too much time riding to take many photos and I hate writing up reports of events....
John, it seems we might have crossed paths in Vianden in Luxembourg last week. Pity I missed you.
All injection engines will return higher fuel consumption with lower temperatures but not that much different. I was also in the Netherlands,...
It makes you wonder about the competency of the dealer. A disconnected sensor should show an error code in the DDA diagnostics that they have...
There are some guys on ducatipaso.org who could be interested in these.
Yes. Brad writes in a way that is straight forward and easy to understand without gobbledegook and jargon. I discovered his work years ago when I...
That paper is is about the Motor Vehicles Blocking Regulation and then goes on to speak about 'cars' throughout it, probably because motorcycles...
Have a look on here. Brad Black is a mine of information.
Pricey though. Even with shipping from the States mine cost less than half of that.
The YR7DE is the equivalent of the NGK DCPR8E-N. The XR5DC is the equivalent of an NGK DR7EA which has no projected nose and is a grade colder. I...
Get them to check the loom pigtail to the front ABS sensor for a break in the wire. Mine was stretched at full lock.
After inserting the 10mm allen key to keep the closing rocker down I use a pair of artery forceps to hold the valve stem. [IMG]
The main thing is you got it fixed. Glad that you didn't have to take the tank off. I'll be checking the condition of mine.
I just use a 10mm Allen key :) [IMG]
You're thinking of the exhaust valve John. The ETV relay (Electronic Throttle Valve) supplies power to the ride by wire throttle servos.
