Separate names with a comma.
I believe the carby Monsters all use the same airbox (they use the same carbs). I removed mine to fit split-single carbs but I modified...
Maybe sufficient to move it closer to the gear by fitting a thinner shim?
Does it have both? I thought only the P8 ecu bikes (early Strada, SP, SPS) had both sensors? Certainly pre '99 single-phase bikes have no...
Welding... ;)
I once used Gun Gum on my 916 link pipe, sealed perfectly but was a pig to separate the next time I removed it. Don't use anything now and any...
Found old cush drives, obviously not new but look to be OK. If you want one PM me your address and I'll put one in the post, unless you can...
I had one like that, I think it was an older model? that was the one that the cush drive popped out the back when it separated internally. I'm...
As for cush drives, I swapped for a renthal carrier after one of the cush drives 'popped' out the back and ground the adjuster some more (had to...
Indeed, my old one wore the circlip groove until the carrier was rubbing against the adjuster. As above newer (998) version is compatible with...
Don't know if it helps but mine has green and brown to the temp sensor and black, white together with white/yellow and red to speed sensor (3 way...
I've got Cyclecat bars on mine which are great as they are adjustable in every direction as the fork clamps move up/down/around and the bar clamps...
Not looking good. Unfortunately the only way to get a view of it is to remove a cylinder (preferably the vertical) and have a good look down...
When people fit 1098/1198 engines into 916 frames they prefer the 998 or 748R frames for the lowered cross-member (though not a huge job to modify...
Those 'O' rings around the filler are a real PITA to fit, everything is so tight and it would be very easy to damage something doing it, I seem to...
Don't think so, the 748R had the 'Kyalami' frame which was made to run a larger airbox on race bikes - initially for Kyalami in South Africa which...
Reasonable enough access to adjust on my 916, helps if you have a pair of spanners though.
Some time back I would have agreed as I had my 916 cylinders plated by them and it has been fine, runs well, plenty of compression, uses no oil...
